Master Bathroom and Dining Room Addition Hanover, Ma – Almar Building & Remodeling
This Project was a 3 Story Addition with a Master Bathroom and Dining area in Hanover, Ma designed and built by Almar Building & Remodeling.
Read the original post:
Master Bathroom and Dining Room Addition Hanover, Ma – Almar Building & Remodeling
Historical District remodel and addition by Studio City
Contractor Tim Sedgwick takes you on a tour of his latest project. This 1926 house is located in the historical district off the M streets in Dallas, TX, with a total of 24 inspections. This is a remodel/addition.
See the original post here:
Historical District remodel and addition by Studio City
When is the best time to Paint
Best time to paint
For best results, paint when the temperature is between 50 and 90 degrees. With an oil based paint, pick a warm day without much humidity to cut down on drying time between coats. Latex dried in a few hours in any weather.
Spring and fall are the best seasons for painting.
Don’t be an early bird when painting. Make sure there is no moisture on the house before starting. Let all the morning dew evaporate off of the house. If working late in the day give yourself enough time to stop before dampness sets it.
To prevent a sunstroke for youself and a paint problem for you house, avoid working in direct sunlight. Do you hour homes westside in the morning and the Eastside in the afternoon. Paint the south side when it’s most shaded.
When painying, try to time your breaks to occur where siding and trim meet or at some other visual transition point. This prevents lap marks and disguises subtle color differences that may occur when you start again.
Find Local area Painters to bid on your home
Post your home improvement job and let painter bid on your job online.
Quick fix a stripped screw in a doorjam
This tips was from a home contractor in Detroit.
Super easy fix for fixing a stripped out screw in a door jamb.
Take out the screw that isn’t tightening enough. Measure the screw and either get a couple of tooth picks or a golf tee. Cut either of them to the length of the screw and insert back into the hole. If you are using tooth picks you will want to use enough to fill the hole.
Once the hole is filled you are ready to put the screw back in.
I love these super easy fixes and thanks for our fan in Detroit for submitting this tip.
Click on the link to post your home repair remodeling job at bidvolt.com
